Key Takeaways
- BurnerSphere now has the tools to run real events in VR: talks, workshops, meetups, and community calls, all built around the Events Kiosk.
- Hosts decide who is heard with Request to speak, Mute All, up to 6 Speaker Stages, up to 8 Breakout Zones, and a countdown timer everyone can see.
- Workshops get up to 8 shared whiteboards with sticky notes. Presenters get slide screens that change for everyone at the same moment, plus a private teleprompter.
- Camp Mates can propose events at Creator Hub. Once approved, events appear in-world, on burnersphere.com, and on Discord.
Picture a talk where the whole playa hears the speaker. Then, with one announcement, everyone splits into small groups to dig in while a big clock counts down the minutes. When time is up, the groups come back together, and their ideas are still on the whiteboards.
That is now possible in BurnerSphere.
No headset needed: BurnerSphere is a social VR immersive documentary platform and an official virtual Burning Man experience, created in collaboration with Burning Man Project. Explore on Mac or PC, or go fully immersive on Meta Quest or PC VR.
Events are back, built for Burners
When Microsoft shut down AltspaceVR in 2023, the Burner community lost the place where it ran talks, workshops, and community calls. Since September 22, 2026, BurnerSphere has its own tools for running real events, inspired by the best of AltspaceVR and ENGAGE.
It started with a request. Noah Nelson, who leads an Immersive X workshop in BurnerSphere, and Thomas Zorbach, who runs Immersive X, asked for whiteboards, sticky notes, and breakout rooms. Those tools now exist, along with a full set of controls for running the room.
“We host a lot of talks and learning sessions in BurnerSphere, and they showed us which tools we needed to make these events run smoother,” says Doug Jacobson, BurnerSphere co-founder and the platform’s Producer, Director, and CTO. “Enter our new Events Kiosk.”
Hosting is Burning Man’s Participation principle in action: “Everyone is invited to work. Everyone is invited to play.” The moment you host, you move from watching the story to living it.
Meet the Events Kiosk

Every event starts with the Events Kiosk. It holds the voice controls, the speaker list, and every event piece: stages, zones, boards, screens, and timers. There is one kiosk per world.
Setting up takes three steps:
- Spawn the Events Kiosk from your backpack or the Toolkit.
- Tap Edit layout and place your pieces: Speaker Stages, Breakout Zones, whiteboards, slide screens, and timers.
- Lock the layout so nothing gets moved or deleted mid-event.
The pieces belong to the kiosk and leave with it, so the world is clean when you are done. Hosts are staff, the person who spawned the kiosk, and world editors.
Run the room: you decide who is heard
Request to speak
Anyone can tap Request to speak. A host approves, denies, or revokes. No more wondering who has the mic.
Mute All
One tap and everyone except approved speakers goes quiet. With Allow self-unmute on, people can unmute themselves. With it off, they can’t. When Mute All ends, everyone gets their previous mute setting back.
Speaker Stages
Step onto a Speaker Stage as an approved speaker and you are heard clearly across the whole world, not just by the people nearby. Place up to 6 stages per world. You may have seen these called amplify zones. Same tool: on the Events Kiosk, it’s the Speaker Stage.
Breakout Zones
Walk into a teal Breakout Zone on the floor and you hear only your group. The rest of the room fades out. Each world can have up to 8 zones, and zones still hear the stage by default, so a host can call out “two minutes left” to everyone at once.
Countdown timer
Place a big clock everyone can see: “You have 10 minutes in breakout rooms.” It turns amber under a minute and flashes red at zero. Only hosts can start or reset it.
Behind the scenes, a voice watchdog checks every 2 seconds that each person is talking into the right channel. Doug added it after the first multi-user test, when a speaker lost her voice after her stage was removed.
Work together: whiteboards and sticky notes
Hosts can drop up to 8 shared whiteboards into a world. Everyone can draw in four colors, undo their own strokes, and watch everyone’s ideas appear about a second after each stroke. On Meta Quest you draw with your controller beam; on PC, with your mouse. Hosts can clear a board or limit drawing to speakers only.
Add a sticky note from the board, type up to 280 characters, and pick from four colors. Drag a note by its top strip to move it, and move the board to bring all its notes along. Only a note’s author and hosts can edit or delete it. On Quest, a floating in-world keyboard makes typing easy.
Boards remember. Strokes and notes are still there next time, until a host clears them. And with one press, Snapshot saves the whole board, notes included, to the Snapshot Gallery on your BurnerSphere dashboard.
Present without lag: slides and a private teleprompter
Slide screens
Presenters used to share slides through a live stream, which put every slide 10 to 20 seconds behind the speaker. Not anymore. Upload a deck once on the slides page in Creator Hub, as a PDF exported from PowerPoint, Google Slides, or Keynote, or as a set of images. Every headset downloads the slides ahead of time, so when you click Next, everyone sees the change at the same moment.
Hosts can place up to 2 large slide screens per world. A host or approved speaker taps Choose deck, picks one of their decks, and uses Next and Back. Decks can hold up to 100 slides. Each slide shows as a still image, so animations and video don’t carry over.
Teleprompter
Tap My Teleprompter on the kiosk to open a script panel only you can see. Nothing about it goes over the network. Upload your script as a PDF on the teleprompter page in Creator Hub.
Scroll with your beam or mouse wheel, or turn pages. Auto-scroll has 6 speeds and pauses whenever you scroll by hand, and A- and A+ give you 6 text sizes. Choose Follow me to keep it floating just below your eyes, or Pin here to leave it in place. A built-in stopwatch helps you keep to time.
You need a BurnerSphere account to open the slides and teleprompter pages, and you must be a Camp Mate to upload.
Put it on the calendar
Camp Mates can propose events right from the website, and approved events show up everywhere people look.
- Propose it. Go to your BurnerSphere dashboard, click Creator Hub at the top, and choose Make Event. Add a title, a short description (up to 330 characters), a longer description (up to 3,000), a square image, the world your event is in, and the time in your own time zone.
- Make it repeat, if you like. Events can run weekly on the days you choose, every 1 to 4 weeks, or monthly on the same weekday, for up to 6 months. After each session, a repeating event moves itself to the next date.
- Let us know. Email events (at) burnersphere (dot) com after you submit.
- We review it. Our team may edit your event, then approve it or decline it with a note. We can also assign a tour guide.
- It goes live everywhere. An approved event appears on the in-world Announcement Board, on the BurnerSphere events calendar within about 15 minutes, in the #events channel of the BurnerSphere Discord, and as a Discord Event. If you change your event, those listings update too.
On the website calendar, people can filter by location, access, and event type, or subscribe with Google Calendar or iCalendar so they never miss your next session.
The event forms are built for everyone. After an accessibility review by Alicia St. Rose, our website designer, they were rebuilt to the WCAG 2.2 accessibility standard: every field is labeled, problems are announced, and the whole editor works from the keyboard.
You’ll be in good company
Right now on the BurnerSphere calendar you’ll find the World Tour and Campfire Gathering with S_Wirly on Fridays at 10 AM Pacific, Videogasm’s Creators Meet and Greet, hosted by Mystery and DigitallyWired, on Wednesdays at 5 PM Pacific, and Coloring Book and Beats on Tuesdays at 6 PM Pacific.
Need ideas? Give a talk about your art or your camp. Run a hands-on workshop with whiteboards and breakout groups. Plan your theme camp with your crew. Host a music set, a community call, or a weekly meetup. If you would gather people for it on the playa, you can gather them here.
See the tools in action at Immersive X 2026
Immersive X 2026 is a free global XR festival in VR, running November 10 to 12, 2026, and several of its sessions take place on the virtual playa in BurnerSphere. Come see Speaker Stages, Breakout Zones, and whiteboards at work:
- BurnerSphere: Getting Ready for Immersive X 2026: Monday, November 9, at 2 PM Pacific (11 PM CET). A beginner-friendly guided session with Athena Demos and Doug Jacobson on getting into BurnerSphere, finding your way around, and meeting other participants before the festival.
- The Next Stage Salon: Where Do Tomorrow’s Art Weirdos Come From?: Tuesday, November 10, at 1 PM Pacific (10 PM CET). Hosted by Noah Nelson with Michaela Ternasky-Holland and Katrina Lat, it pairs a panel with small-group conversations about where emerging immersive creators come from.
- The BurnerSphere Build-a-Thon: Building Virtual Camps with No-Code Worldbuilding: Tuesday, November 10, from 3 to 5 PM Pacific (midnight CET). A hands-on workshop with Athena Demos and Doug Jacobson: learn BurnerSphere’s no-code creation tools, form small teams, and start building camps on the virtual playa. Teams can keep building through the festival and show their camps on the final day. No coding or worldbuilding experience needed, and it’s open to Camp Mates and Guests.
- The Great Build Tour: Exploring the BurnerSphere Build-a-Thon Creations: Thursday, November 12, at 8 AM Pacific (5 PM CET). Athena and Doug lead a guided world hop through the camps built during the Build-a-Thon and meet the people who made them.
What’s next
Doug has more on the wish list, including spatial recording, so you could replay a talk with the avatars, voices, slides, and whiteboard as if you were in the room. Also on the list: a People in World list for quicker speaker approval, per-person mute, an On Stage name tag icon, and Message All. These aren’t built yet, so stay tuned.
Tips for a great event
- Upload early. Add your deck and script in Creator Hub before the day, then check them in-world.
- Arrive before your guests. Spawn the kiosk, place your pieces, and lock the layout.
- Plan the sound. Decide who speaks from the stage, when to use Mute All, and whether people can self-unmute.
- Keep time. Start the countdown timer before breakouts, and call “two minutes left” from the stage.
- Save the ideas. Snapshot your whiteboards before everyone heads out.
Frequently Asked Questions
Who can host an event?
The hosting tools are part of Camp Mate membership. Camp Mates can spawn the Events Kiosk and propose events on the calendar through Creator Hub, and your Camp Dues help cover the cost of the servers that run these tools. In-world, hosts are staff, the person who spawned the Events Kiosk, and world editors. Everyone is welcome to attend. Learn how Camp Mate membership works.
Can people join from different devices?
Yes. BurnerSphere runs on Mac, PC, Steam, and Meta Quest, and people on all of them can be in the same event at the same time.
How many stages, zones, boards, and screens can I use?
Up to 6 Speaker Stages, 8 Breakout Zones, 8 whiteboards, and 2 slide screens per world.
Can my slides include animations or video?
No. Each slide shows as a still image, and decks can hold up to 100 slides.
Do whiteboards save?
Yes. Strokes and sticky notes stay until a host clears them. Snapshot saves a copy to the Snapshot Gallery on your dashboard, on Mac, PC, and Quest.
Your stage is waiting
Culture is not what you say. It is what you invite people to co-create.
Pick a date, spawn your Events Kiosk, and invite your people in. Become a Camp Mate, head to Creator Hub on your dashboard, and make your event. Come take a stroll in the digital dust.